1. Gasoline:
The general principle is to try to increase the gasoline supply at start-up to make up for the lack of gasoline vaporization caused by low temperature and poor gasoline volatility. Generally, it can be solved by closing the choke door and increasing the concentration of the mixed gas. If necessary, it can be solved by injecting a little gasoline into the cylinder, or pouring boiling water on the outside of the carburetor and intake pipe to increase the temperature of the carburetor and promote the vaporization of gasoline. Secondly, before starting a cold car, turn off the electric door, step on it for a few times, and then open the electric door lock and start with a little throttle. The purpose of the empty price is to pump a little more oil to the carburetor so that it is easier to start after each oil circuit is filled with oil.
2. Lubricating oil:
In order to reduce the starting resistance, please switch to lubricating oil with lower viscosity in winter. Before turning on the ignition switch, you can step on the start pedal several times; when starting, place the transmission in neutral and hold the clutch grip to disengage the clutch to minimize the starting resistance.
3. In terms of current:
If the minimum temperature drops below zero, the battery must be removed and stored in a warm place indoors to prevent the battery from freezing and cracking. The battery that is removed should be checked frequently (with a wire directly touch the positive and negative electrodes of the battery to see if the spark is strong) and check whether the replenishment fluid is sufficient. If the battery is insufficient, the battery replenishment fluid should be fully refilled, and the battery should be fully charged. adequate. Finally, the spark plug can be removed, and the gap can be adjusted smaller after cleaning, so that the spark plug can be easily ignited.
