250cc 300cc 350cc gasoline petrol carga moto triporteur
{description}
| Engine | 250cc,water-cooling |
| Chassis | 50*100 |
| Rear- Axle | Intergral booster drum,Φ220 |
| Operating model | Handle (optional Car Steering Wheel) |
| Front Shock Absorber | 09 type spring |
| Rear Spring Leafs | 5+2 |
| Rear Brake | Hydraulic |
| Wheels Type | Five |
| Front/Rear Tire | 5.00-12/5.00-12 |
Production process：
Our 250cc gasoline petrol carga moto triporteur,300cc gasoline petrol carga moto triporteur,350cc gasoline petrol carga moto triporteur bracket is designed and produced by ourselves, using cold plates to form it in one go. The original general bracket, like rubber soft connection, or square steel formed in one go, is made by hot plate transformation. We use cold plate stamping to form it in one go, which not only looks beautiful, but also enhances the overall strength.
The production process of tricycles can be roughly divided into the following main stages:
1, Design and R&D
Design: including 2D design of renderings, 3D design, and design of sound, light, and electrical control parts. This step requires a professional design team to ensure that the appearance, performance, and safety of the tricycle meet the design requirements.
Production: involves the production of structural components, transparent parts, doors and hinges, handles, seals, etc., as well as the processing of ABS exterior and interior parts, the procurement of steering handles and display screens, the processing of wheel hubs and other components, and the selection of seats.
2, Processing and assembly of core supporting components
Frame processing: A complete frame is formed through processes such as welding, bending, assembly, electrophoretic painting, etc. This step requires ensuring the strength and stability of the frame, as well as the aesthetic appearance.
Motor assembly: Use automatic winding equipment to complete the winding of copper wire stator, then install magnetic steel and metal cover, and finally inject liquid oil for motor corrosion prevention and lubrication. The motor is the power source of the tricycle, and its quality and performance directly affect the driving effect of the tricycle.
3, Component assembly
Main component installation: On the production line, according to certain templates and standards, install the wheel hub motor, front wheels, front end, front fork, shock absorber, brake, controller, wiring harness, etc. in place in sequence.
Installation of auxiliary components: Next, install plastic parts such as lamps, seat barrels, shells, and other necessary auxiliary components.
4, Offline detection
Performance testing: Inspectors conduct performance tests on tires, brakes, shock absorbers, handlebars, etc. to ensure that all performance meets design requirements.
Load bearing test: Conduct load-bearing tests such as water immersion and load testing to verify the load-bearing capacity and durability of the tricycle.
Shipping and packaging：
Our company's 250cc gasoline petrol carga moto triporteur,300cc gasoline petrol carga moto triporteur,350cc gasoline petrol carga moto triporteur support both full bulk and semi bulk, and each type of material will be individually packaged according to ISO packaging standards. We adopt standardized transportation methods, one of which is container transportation, seamless transfer throughout the entire process, and door-to-door transportation without the need for self unpacking. Packaging and Shipping
Warehouse packaging: According to the model of the tricycle, place the certificate of conformity, warranty card, and accompanying accessories inside. Then pack it to ensure that it will not be damaged during transportation.
Logistics delivery: After the distributor places an order through the enterprise system, the enterprise generates a delivery note, which is then uniformly shipped by the logistics department. This step requires ensuring timely and accurate delivery.
In summary, the production process of tricycles is a complex and intricate process that requires close collaboration among multiple departments and teams. Each step requires strict adherence to design requirements and technical standards to ensure the quality and performance of the final product.
Quality control：
using pneumatic fixtures to ensure stronger welding strength and better consistency, with tooling production following automotive standards and obtaining multiple patents. 360 reverse tooling is used to weld the frame, ensuring reduced welding leakage
1, Quality control during the design and manufacturing phases
Design quality control
The design department should have strong design capabilities and comply with relevant national standards and regulatory requirements.
During the design phase, detailed engineering analysis and calculations should be conducted to ensure that the structural strength, stability, and safety of the tricycle meet the requirements.
Develop detailed design specifications, clarify product quality and safety requirements, and fully consider the safety performance, reliability, usability, and environmental friendliness of the product.
Manufacturing Quality Control
Manufacturers should have advanced production equipment and technology, and strictly follow relevant technical specifications and process flows.
Raw material inspection: Strictly inspect raw materials to ensure compliance with quality requirements.
During the production process, quality control should be implemented for each manufacturing step to ensure that every step meets the quality control requirements.
Finished product inspection: Strictly inspect finished products to ensure their quality is qualified.
2, Quality control during the testing and inspection phase
performance testing
Test the overall performance of the tricycle, including power performance, braking performance, handling performance, etc.
Ensure that the tricycle can operate stably under various working conditions and meet user needs.
Security performance testing
Test the safety performance of tricycles, including collision safety, fire safety, electrical safety, etc.
Ensure that tricycles can protect the safety of drivers and passengers in case of accidents.
Durability testing
Conduct durability testing on tricycles, simulate long-term use, and inspect the wear and aging of the vehicle.
Ensure that the tricycle can maintain stable performance throughout its service life.
Battery performance testing
Conduct performance tests on the batteries of electric tricycles, including battery capacity, charging time, discharging time, etc.
Ensure that the battery can meet the operational needs of the tricycle and has a long service life.
3, Quality control in the sales and after-sales service stages
Sales Quality Control
The sales department should ensure that the tricycle products sold comply with relevant national standards and regulatory requirements.
Provide accurate product information and usage instructions to consumers to ensure they can use tricycles correctly.
Quality control of after-sales service
Establish a sound after-sales service system, including service network, parts supply, and complaint handling.
Provide timely and effective after-sales service to solve problems encountered by consumers during use.
Train after-sales service personnel to enhance their service awareness and professional skills.
4, Quality Management System and Supervision
Develop and implement a quality management system
Manufacturers should develop strict quality management plans and execute them according to the plans.
Ensure the achievement of quality objectives through effective management measures, including quality control, quality testing, and quality improvement.
Strengthen quality supervision and market regulation
The government and relevant departments should strengthen supervision over the production and sales of tricycles, and establish a sound regulatory system.
Strictly crack down on counterfeit and shoddy products and illegal activities, and safeguard the rights and safety of consumers.
Strengthen market monitoring and quality inspection work, timely discover and handle quality problems.
Hot Tags: 250cc 300cc 350cc gasoline petrol carga moto triporteur, China, suppliers, manufacturers, factory, customized, high quality, for sale, Three Wheeler Cargo Motor Tricycle with Roof, Wheel Motorized Tricycle, Car 800cc Petrol Engine Cargo Tricycle, Shock Absorber for Tricycle Front fork Parts, 350cc open body Tricycle, Hydraulic dump Cargo Tricycle
